Wednesday, 8 August 2012

Passing the CCNA Security exam

The CCNA certification is valid for 3 years and mine was due to expire at the end of August 2012. I could either retake the same exam and recertify, or take another CCNA "concentration" exam that would give me a new certification and renew the original certification at the same time. I opted to tackle the CCNA Security exam, IINS 640-553.

I'd originally bought the Cisco Press "Authorized Self-Study Guide", Implementing Cisco IOS Network Security by Catherine Paquet back in 2010, but the material is a bit dry and I didn't have the motivation to get into it very far. By booking the exam, I suddenly acquired the motivation required.

As things happen, the 640-553 exam is due to be retired in September 2012, to be replaced by 640-554. The main difference in the new exam appears to be an additional focus on the Cisco ASA platform, as well as de-emphasising the Cisco Secure Device Manager (SDM). This means that any advice I give here will be redundant soon, and also I'm bound by the NDA, so can't obviously comment on what is in the exam.

What I can do though is give some general thoughts on the revision process:

The Good

The Implementing Cisco IOS Network Security book is very thorough. It covers a lot of detail and assumes little prior knowledge of security. Some of it is dry, especially the first chapter which weighs in at about 100 pages and gives an introduction to the world of security. Once that's passed, the content gets better and even the chapter on cryptography was interesting(!).

I also bought the Cisco CCNA Security Lab manual for the CCNA Security course. This gave some very good exercises to run through which were very useful in grounding the theory in the practical.

All of this was made possible using the amazing GNS3 router simulation software. I installed this on a meaty Windows Server VM and was able to run the 3 routers and 2 XP images (in Virtualbox, under ESXi) without any problems. The ability to save configurations and easily re-import them was a great time saver. GNS3 doesn't do everything (specifically switches, due to the custom silicon in them), but it made the whole process of learning the syllabus a lot easier.

There is some very good material at the Cisco Learning Network including free study chapters, training videos and discussions. Highly recommended.

The Bad

Cisco sell the book for self-study, but make it very difficult to practice because IOS images are not available without having the correct support contract. If you work for a large company with either old routers sat on a shelf or a contract with the ability to download the image then you'll be okay. Otherwise I guess you'll be searching the Internet for a dodgy copy of an old image. Seriously Cisco, how about making them freely available? You can do the study material with a 2600 series router and how old is that?

The same is true of the IPS signatures. A valid contract is required just to learn how the IPS works and again, this could mean a trip to the darker parts of the Internet to find them.

The Cisco Press book covers the Cisco Access Control Server software but it's not in the syllabus or lab manual. It can be used to learn about AAA and specifically authentication and authorization with RADIUS and TACACS+. Unfortunately Cisco don't have a trial version to help self-studying students.

The Ugly

Getting the Cisco Security Device Manager (SDM) working requires jumping through a number of hoops. To cut a long story short, you need an old version of Java (1.4 worked for me) and Windows XP. I'm guessing the latter requirement is due to Internet Explorer 6 as I couldn't get it working on Server 2008 R2 no matter what settings I tried.

Conclusion

Having worked through the labs a number of times and then setting things up "blind" (without referring to any notes), I felt fairly confident as I went into the exam. I passed with a good mark well above the passing level, so I'm naturally very pleased with this. It's a good subject to read up on since security requirements impact on so much of what we design these days. The CCNA Security should demonstrate I now have a solid grounding in the subject, even if I'm still a long way from being an expert.

4 comments:

Douglas Miller said...

How did you make do without the switches?I'm debating if I should build another box dedicated for Gsm3. I have 2 catalyst 2950s, a 2611XM and a 2611 as it is. It seems like its easy to get out of hand easily with the Cisco gear for labs.

Douglas Miller said...

Also I wanted to see if I had this right too.Your running Windows Server as a VM on the hypervisor and had the 3 routers running on two XP images; one on one and two on the other? Or is the whole deal on its own instance?I have still been confused on how thin clients fit in,surely there are better options then running a RDP client. That defeats the purpose eh?

Archana Nair said...
This comment has been removed by a blog administrator.
Star Bucks said...
This comment has been removed by a blog administrator.